Table of Contents  
CASE REPORT
Year : 2020  |  Volume : 16  |  Issue : 1  |  Page : 39-43

Customized hollow surgical stent for congenital vaginal agenesis in early adolescent female with MRKH syndrome: a case report


1 Senior Professor and Head, Department of Prosthodontics, Post Graduate Institute of Dental Sciences, Pt. B.D Sharma University of Health Sciences, Rohtak, Haryana, India
2 Professor, Department of Obstetrics and Gynaecology, Post Graduate Institute of Medical Sciences, Pt. B.D Sharma University of Health Sciences, Rohtak, Haryana, India
3 Senior Resident, Department of Prosthodontics, Post Graduate Institute of Dental Sciences, Pt. B.D Sharma University of Health Sciences, Rohtak, Haryana, India
4 Post Graduate Student, Department of Prosthodontics, Post Graduate Institute of Dental Sciences, Pt. B.D Sharma University of Health Sciences, Rohtak, Haryana, India

Date of Submission12-Sep-2019
Date of Acceptance17-Jun-2020
Date of Web Publication17-Sep-2020

Correspondence Address:
Dr. Prachi Jain
Post Graduate Institute of Dental Sciences, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak, 124001, Haryana
India
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/njps.njps_8_19

Rights and Permissions
  Abstract 

Mayer-Rokitansky-Kuster-Hauser syndrome (MRKH) is a congenital malformation resulting in the absent or small uterus and variable degrees of vaginal hypoplasia of its upper portion. One of the treatment goals for these patients is the creation of an artificial vagina either conservatively or surgically. Use of long-term prosthetic vaginal stents prevents the possible contraction of the reconstructed vagina, maintain vaginal width and depth and avoid vaginal stenosis. Prefabricated stents of standard sizes have widely been utilized to assist surgical creation of a neovagina. However, a customized stent has the evident advantage of the possibility of adjusting the size as per individual patient requirements. In the present clinical report, an early adolescent female patient with MRKH syndrome was surgically managed with insertion of a customized vaginal stent that offers the versatility of design configuration to suit the various clinical situations.

Keywords: Amniotic graft, customized stent, Mayer–Rokitansky–Kuster–Hauser syndrome, vaginal agenesis


How to cite this article:
Rathee M, Chauhan M, Jain P, Shetye A. Customized hollow surgical stent for congenital vaginal agenesis in early adolescent female with MRKH syndrome: a case report. Nigerian J Plast Surg 2020;16:39-43

How to cite this URL:
Rathee M, Chauhan M, Jain P, Shetye A. Customized hollow surgical stent for congenital vaginal agenesis in early adolescent female with MRKH syndrome: a case report. Nigerian J Plast Surg [serial online] 2020 [cited 2024 Mar 28];16:39-43. Available from: https://www.njps.org/text.asp?2020/16/1/39/295256


  Introduction Top


Vaginal agenesis is a rare condition having devastating consequences on fertility and sexual function with an incidence ranging from 1 in 4,000 to 1 in 10,000 females.[1] The most common aetiology of vaginal agenesis is Mayer–Rokitansky–Kuster–Hauser syndrome (MRKH) which is characterized by a congenital absence of uterus and vagina compromising the normal functions of the genital tract, thereby causing psychological trauma.[2]

Vaginal agenesis is one of the important causes of primary amenorrhea and can be detected by diagnosis performed during puberty.[3] Following diagnosis, the patients can be treated by both surgical and non-surgical approaches. The surgical procedure commonly preferred is McIndoe’s vaginoplasty which involves the creation of a space between bladder and rectum, followed by insertion of a mould covered with split-thickness skin graft into that neovaginal space, and use of postoperative vaginal dilation to avoid stenosis.[1] Autologous graft like buccal mucosa has also been used with success. Allograft like amnion has been used to line the neovagina, which can reduce the morbidity of the graft donor site.[4]

This clinical report presents a case of MRKH syndrome managed surgically using McIndoe’s vaginoplasty surgical technique assisted by a vaginal stent customized as per the required design and size.


  Case report Top


A 19-year-old young female patient with a diagnosis of MRKH syndrome was referred to the Department of Prosthodontics, from the Department of Obstetrics and Gynaecology for the fabrication of vaginal stent. The chief complaint of the patient was cyclic abdominal pain since 5-6 years. There was a history of primary amenorrhea. The patient and the accompanying mother was in utmost distress and was consented for immediate surgical treatment.

On general examination, the patient appeared normal and of average intellectuality. Slight clinodactyly was observed on bilateral hands. Gynaecological examination showed that her secondary sexual characteristics were of Tanner stage 4. External genitalia was normal for age with the presence of vaginal dimple. The ultrasonography (USG) revealed a left ectopic kidney.

Surgical treatment was scheduled after detailed counselling regarding the surgical procedure, its purpose, outcome and its possible complications. The dimensions of the stent were determined preoperatively by the gynaecologist based on the thickness of the intervening tissue between the perineum and pelvic peritoneum which was determined by magnetic resonance imaging (MRI) and was thereafter fabricated by the prosthodontist accordingly. The benefits of vaginal stent postoperatively were explained to the patient and her mother. Written consent was taken before commencement of treatment.


  Fabrication of vaginal stent Top


As per the required dimensions of the gynaecologist, a vaginal stent was fabricated measuring 9 × 3 × 2.5 cm. A hollow heat-cured acrylic stent was planned. A hollow metal cylinder was used and was cut as per the required dimensions [Figure 1]. Upon the external surface of the metal cylinder, modelling wax (API Rolex Modelling Wax) was shaped according to the necessary width and then smoothened [Figure 1]. The wax mould was then invested [Figure 2]. The final packing was done with heat cure acrylic resin (DPI Heat cure) and the final vaginal stent was obtained [Figure 3]. The final stent was adjusted in dimensions to a conical shape. Thereafter, finishing and polishing of the stent were done to provide a smooth surface.
Figure 1 Modelling wax adapted to the metal cylinder, (A) length dimensions (B) Width dimensions

Click here to view
Figure 2 Invested wax pattern

Click here to view
Figure 3 Heat cured acrylic vaginal stent (A) Final length (B) Final width

Click here to view



  Surgical procedure Top


Surgery was preceded with a strict note of overnight fasting. Abbe McIndoe vaginoplasty procedure was planned. A single intravenous dose of 1000 mg cefotaxime was given 30 minutes before the operation for antimicrobial prophylaxis. Under spinal anaesthesia, the patient was laid in the lithotomy position. The bladder was catheterized with Foley’s catheter. An incision was given over both the sides of median raphe on the vaginal dimples. A potential space was created between the urethra and bladder anteriorly and rectum posteriorly by blunt dissection. The dissection continued until a neovagina was obtained [Figure 4]. Haemostasis was achieved. The specially designed vaginal stent was covered with amnion graft and was later inserted into the neovagina [Figure 5A and 5B]. The amnion was obtained from a women who delivered within six hours, had intact membranes and whose viral markers for Hepatitis B, C and HIV were negative. The labia minora were sutured with two transverse vulvar sutures to keep the stent in position and retained in the neovagina.
Figure 4 Creation of neovagina

Click here to view
Figure 5 (A) Heat cured acrylic vaginal stent covered with amnion (B) McIndoe vaginoplasty with vaginal stent sutured in neovagina

Click here to view


Postoperatively after six hours, the patient was followed by a soft diet. The perineal area was regularly checked for any bleeding, discharge, the position of mould, and any cutting through of the vulvar sutures.


  Follow up Top


On seventh postoperative day, the labial stitches were cut and the stent removed. The amnion was taken up well and a vagina of approximately 8 cm was formed. There were no complications except for a minimal fibrous tissue formation which was managed by changing the stent dimension size and further adjusted through trimming the stent by a few millimetres. The patient continued wearing the stent day and night until the next follow up which was scheduled after one month. The follow up showed a well created resultant neovagina [Figure 6]. Compliance for the use of the stent was satisfactory. The patient and her parents were satisfied with the treatment outcome and follow-ups were maintained regularly.
Figure 6 Resultant neovagina after one month of follow-up

Click here to view



  Discussion Top


Mayer-Rokitansky-Kuster-Hauser (MRKH) syndrome refers to the congenital aplasia or severe hypoplasia of the structures that are derived from the Mullerian ducts, including the upper vagina, uterus, and fallopian tubes. Young women diagnosed with MRKH syndrome are phenotypically normal women with karyotype 46, XX who suffer from extreme anxiety and very high psychological distress.[5]

Various techniques have been used to create a neovagina as a part of the treatment through a non-surgical or surgical approach. Non-surgical methods include vaginal dilation which is recommended as the first line of treatment in vaginal agenesis. It involves insertion into the vaginal dimple, vaginal moulds of specific length and width which is gradually increased. These moulds apply local pressure, hence, increase the space between rectum and bladder. However, it is a time-consuming process and distressing to the patient as it acts as a constant reminder of her abnormality.[6] Surgical vaginal reconstruction includes Williams vulvovaginoplasty, pressure method (Vecchietti procedure), neovagina creation procedures within the rectovesical space and lined with different types of tissue, such as skin (McIndoe Reed), peritoneum (Davydov), intestine or perhaps in the future tissue-engineered vaginal mucosa.[6]

Several authors have documented good results after operations using McIndoe’s method. Satisfactory or good sexual relationships have been described in 83% to 100% of patients in studies, which include a total of more than 1000 patients. The McIndoe procedure is one of the most often performed surgical procedure which requires the surgical creation of a space in between the rectum and the bladder, placement of a mould covered with a split-thickness skin graft into space, and use of vaginal dilators postoperatively.[7] The use of skin graft involves a plastic surgeon and is a time-consuming procedure. Thus material like amnion has been used. Amnion is readily available and has been found to give good results. Over recent years, new treatment options have been emphasized. Due to the difficulty for women with MRKHS to accept infertility, surrogacy is also an alternative method in many countries.

Surgical vaginal stents have also been described for postoperative maintenance after McIndoe vaginoplasty.[8],[9] The use of stent maintains the desired width and depth of vagina postoperatively and avoids shrinkage and stricture of neovagina during healing.[8] Vaginal stents can be prefabricated or customized. They are used with increasing diameters during the healing period postsurgery. Several prefabricated stents of various designs are available. However, these are hard, costly, and only available in specific sizes and do not suit all the clinical situations.[9] A customized stent, on the other hand, overcomes this disadvantage as they provide a provision of adjusting the size as per individual patient’s requirements, thus is suitable for variable clinical situations.

Customized vaginal stents can be of various materials like inflatable soft stents with or without suction, silicone-based or acrylic-based rigid stents.[10] Silicone vaginal stents if not maintained properly can be prone to fungal infections and deterioration with time. Moreover, it is costly compared to acrylic resin and has the tendency to tear in long-term use and may require refabrication.[2] In the present case report, the vaginal stent was fabricated using heat cure acrylic resin due to its several advantages of simple design, ease of fabrication, cost-effectiveness, rigidity, adequate strength, wear-resistant and less irritative for vaginoplasty surgeries.[10]

These procedures are meant to improve the sexual functionality of the vagina and improve the quality of life of the women. However, concomitant psychological interventions and follow-up directions are further needed for management.


  Conclusion Top


MRKH syndrome has to be carefully recognized and when seeking treatment options, it is necessary to consider interventions which majorly depend on patient compliance. McIndoe vaginoplasty is the most commonly used surgical method in recent years which include the creation of an artificial vagina followed by insertion of prosthetic vaginal stents to prevent vaginal stenosis and to maintain vaginal width and depth. Customised heat-cured acrylic resin vaginal stent fabricated in the present case offers various advantages over other materials used in the past as it is economical, has adequate strength, wear-resistant, is easy to prepare and cause less irritation. It offers size and configuration adjustability to best suit the surgeon and the patient.

Declaration of patient consent

The authors certify that they have obtained all appropriate patient consent forms. In the form the patient(s) has/have given his/her/their consent for his/her/their images and other clinical information to be reported in the journal. The patients understand that their names and initials will not be published and due efforts will be made to conceal their identity, but anonymity cannot be guaranteed.

Financial support and sponsorship

Nil.

Conflicts of interest

There are no conflicts of interest.



 
  References Top

1.
Michala L, Cutner A, Creighton SM. Surgical approaches to treating vaginal agenesis. BJOG 2007;114:1455-9.  Back to cited text no. 1
    
2.
Kamalakannan J, Murthy V, Kularashmi BS, Jajoo K. Customized silicone vaginal stent. J Obstet Gynaecol India 2015;65:281-3.  Back to cited text no. 2
    
3.
Beksac MS, Salman MC, Dogan NU. A new technique for surgical treatment of vaginal agenesis using combined abdominal-perineal approach. Case Rep Med 2011;1-6.  Back to cited text no. 3
    
4.
Rathee M, Boora P, Kundu R. Custom fabricated acrylic vaginal stent as an adjunct to surgical creation of neovagina for a young female with isolated vaginal agenesis. J Hum Reprod Sci 2014;7:272-5.  Back to cited text no. 4
[PUBMED]  [Full text]  
5.
Ledig S, Wieacker P. Clinical and genetic aspects of Mayer-Rokitansky-Kuster-Hauser syndrome. Med Genet 2018;30:3-11.  Back to cited text no. 5
    
6.
Michala L, Cutner A, Creighton SM. Surgical approaches to treating vaginal agenesis. BJOG 2007;114(12):1455-9.  Back to cited text no. 6
    
7.
Gari A. Mclndoe Neovagina in patients with Mullerian Agenesis: a single center experience. Pak J Med Sci 2017;33:236-40.  Back to cited text no. 7
    
8.
Rathee M, Singhal SR, Malik S, Gupta G. Resilient customized hollow vaginal stent for the treatment of vaginal agenesis in Mayer-Rokitansky-Kuster-Hauser Syndrome. Niger J Surg 2020;26:88-91.  Back to cited text no. 8
  [Full text]  
9.
Barutçu A, Akguner M. McIndoe vaginoplasty with the inflatable vaginal stent. Ann Plast Surg 1998;41:568-9.  Back to cited text no. 9
    
10.
Coskun A, Coban YK, Vardar MA, Dalay AC. The use of a silicone-coated acrylic vaginal stent in McIndoe vaginoplasty and review of the literature concerning silicone-based vaginal stents: a case report. BMC Surg 2007;7:13.  Back to cited text no. 10
    


    Figures

  [Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6]



 

Top
 
 
  Search
 
Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
Access Statistics
Email Alert *
Add to My List *
* Registration required (free)

 
  In this article
Abstract
Introduction
Case report
Fabrication of v...
Surgical procedure
Follow up
Discussion
Conclusion
References
Article Figures

 Article Access Statistics
    Viewed3699    
    Printed288    
    Emailed0    
    PDF Downloaded236    
    Comments [Add]    

Recommend this journal


[TAG2]
[TAG3]
[TAG4]